JonesZylon's MaxFlex drinkware, including tumblers and mugs, is engineered for correctional facilities, featuring an exclusive polymer blend that enhances safety by preventing weaponization while providing high durability against breakage and chipping. These reusable and recyclable items are dishwasher safe, capable of withstanding temperatures from -40°F to 225°F, and come in a variety of colors and sizes.
Request Free Samples Request a QuoteUse the documented cup and mug limits in the model table below, -40 to 225 °F for the cited MaxFlex drinkware sheets. Match the order code and obtain current care instructions before specifying the product.
Sort By Drinkware Type
Tell us which MaxFlex tumblers or mugs you are evaluating and the quantities your facility needs. Use the form to request pricing, product guidance, or free dinnerware samples.
Order MaxFlex tumblers and mugs by the printed model, capacity and outside dimensions. Check the tumbler’s model identifier carefully, then test the filled cup or mug through serving, collection and washing.
| Model | Printed specifications | Source |
|---|---|---|
| FXVA-6 | 5 oz; 3.50 in high × 2.38 in diameter. 72 per case. | MaxFlex V-Cut Tumblers.pdf |
| FXVB-10 | 9 oz; 4.00 in high × 2.75 in diameter. 72 per case. | MaxFlex V-Cut Tumblers.pdf |
| FXVB-12 | 12 oz; 5.13 in high × 2.88 in diameter. 72 per case. | MaxFlex V-Cut Tumblers.pdf |
| FXVB-16 | 15.5 oz; 5.75 in high × 3.13 in diameter. 72 per case. | MaxFlex V-Cut Tumblers.pdf |
| FXA-Squat | 9 oz; 2.84 in high × 3.3 in diameter. 72 per case. | MaxFlex Squat Tumblers.pdf |
| FXSM-8/9 | 9.5 oz; 3.88 in high × 2.88 in diameter. 72 per case. | MaxFlex Stacking Mug (9.5 Ounce).pdf |
| FXSM-10 | 13 oz; 3.875 in high × 3.375 in diameter. 72 per case. | MaxFlex Stacking Mug (13 Ounce).pdf |
JonesZylon dinnerware carries a 12-month warranty from the date of purchase against defects in material or workmanship. Dinnerware determined to be defective due to improper material or workmanship, at the sole discretion of JonesZylon, will be replaced at no charge. See the full warranty terms.
The MaxFlex drinkware sheets print “Optimized durability - break, chip, and crack resistant.” The photographs below show a tumbler and a mug squeezed by hand.


The V-Cut sheet’s title and dimension lines use FXVA-6, FXVB-10, FXVB-12 and FXVB-16. Its illustration also uses shorter FXV labels. Use the identifiers in the dimension table when requesting confirmation for a replacement. The FXVB-10 dimension line prints 9 oz; the stacking mug FXSM-8/9 prints 9.5 oz. Keep those products separate in the quote.
Use the sheet’s printed capacity when choosing the model. Record the required beverage portion and actual serving fill during the trial. Check whether staff can carry a filled cup without squeezing the sidewall enough to spill, and whether the chosen fill leaves the handling space your procedure needs.
FXA-Squat prints an outside height of 2.84 inches and a diameter of 3.3 inches. Its sheet describes a shorter height for small openings and names a Dart 10FTL disposable lid. Verify the actual cup and any lid used in your operation. Measure the overall height with the cover fitted.
Measure the opening and check the staff member’s grip during the handoff. Include tray placement, beverage fill and the receiving surface in that check. Record the complete arrangement so a future cup or lid substitution triggers another fit review.
Stacking lugs and a V-cut bottom for drip drying appear on the V-Cut tumbler sheet. The squat tumbler also has described stacking lugs, while both mug sheets describe stackable designs and handle space. Check each feature with the actual wash rack and storage shelf.
Separate returned beverage ware from clean inventory, empty it and run the approved wash, rinse and sanitation procedure. Check interiors, rims, handles and stacking features for retained soil or water. Allow the pieces to dry before nesting them for the next service. Record sticking or handling difficulty observed during the trial.
Count tumblers and mugs by model and housing unit. Use the MaxFlex inventory method for pieces still in service, returns, washing, drying and reserve stock, then convert the required pieces to cases.
FXVB-10 is listed at 9 oz on the linked V-Cut tumbler sheet. FXSM-8/9 is a separate stacking mug with a printed 9.5 oz capacity.
FXA-Squat is the identifier on the MaxFlex squat tumbler sheet, which prints a 9 oz capacity.
All linked V-Cut, squat tumbler and stacking mug sheets print -40 to 225 °F.
Check the loaded cup, any lid and the space needed for the staff member’s hand against the actual opening.
Each linked MaxFlex drinkware sheet prints 72 pieces per case.
Inspect the interior, rim, handle and stacking features, then allow the pieces to dry before returning them to clean storage.
Request a Quote Request Free Samples
JonesZylon model specification sheets, reviewed from local copies September 8, 2026. Values above are printed manufacturer specifications.