Correctional tray selection

Segregation and SHU meal trays with lids

Match the tray and lid to your menu, measured door opening and custody procedure. Compare documented models below, then evaluate samples with your staff.

Quick answer

Choose a segregation or SHU meal tray by the loaded meal and the measured food-port opening. Check the exact tray and lid identifiers, assembled height and staff grip clearance before a sample trial. Where tray and lid sheets conflict, use the newer cited record and confirm the sample combination. Record both identifiers so replacement orders preserve the tested arrangement.

Reviewed . JZCC-4200 specification (PDF)

4300, 5300, 9300 and 9400 segregation tray sizes

Copolymer three compartment small segregation tray JZCC-4200 in chocolate
JZCC-4200, copolymer, takes the JZL-4200 lid.
MaxFlex three compartment small segregation tray FXSTB-4300 in chocolate
FXSTB-4300, MaxFlex, nearly the same footprint in the flexible material.
Copolymer three compartment medium segregation tray JZCC-5200 in chocolate
JZCC-5200, copolymer, takes the JZL-5200 lid.
MaxFlex three compartment medium segregation tray FXSTB-5300 in chocolate
FXSTB-5300, MaxFlex, the medium three compartment tray.
Copolymer three compartment large segregation tray PPST-9300 in chocolate
PPST-9300, copolymer, the large three compartment tray.
MaxFlex three compartment large segregation tray FXSTB-9300 in chocolate
FXSTB-9300, MaxFlex, takes the FXLB-9 lid.
Copolymer four compartment large segregation tray PPST-9400 in chocolate
PPST-9400, copolymer, the four compartment large tray.
MaxFlex four compartment large segregation tray FXSTB-9400 in chocolate
FXSTB-9400, MaxFlex, the four compartment large tray.

Choose a footprint that accommodates your menu and measured opening. The compact families include JZCC trays with JZL lids; the large families include PPST and FXSTB trays. Match the complete model code when replacing inventory. Open the PDF linked in each cell to check the model specification.

Dimensions below are printed manufacturer values, CERTIFIED transcriptions. Assembly height describes the seated tray and lid. Compartment volumes are printed in ounces; check your actual portions.

Compact segregation trays and documented lids
Tray / materialL x W x H (in.)Compartments (oz)LidAssembly H (in.)Printed range
FXSTB-4300
MaxFlex [1]
8.38 x 6.38 x 1.88 [1]19.8; 6.5; 6.5 [1]No current pairing published [9]Measure sample-40 to 225 °F [1]
JZCC-4200
Copolymer [2]
8.38 x 6.25 x 1.88 [2]19.8; 6.5; 6.5 [2]JZL-4200 [2] [12]2.25 [2] [12]0 to 212 °F [2]
FXSTB-5300
MaxFlex [3]
9.13 x 6.38 x 2.25 [3]24.5; 7.4; 7.4 [3]FXLB-5 [3] [10]2.38 [3]-40 to 225 °F [3]
JZCC-5200
Copolymer [4]
9.13 x 6.38 x 2.13 [4]24.5; 7.4; 7.4 [4]JZL-5200 [4] [13]2.38 [4] [13]0 to 212 °F [4]
Large segregation trays and documented lids
Tray / materialL x W x H (in.)Compartments (oz)LidAssembly H (in.)Printed range
FXSTB-9300
MaxFlex [5]
10.50 x 8.50 x 2.13 [5]34.7; 17.4; 11.8 [5]FXLB-9 [5] [11]2.25 [5] [11]-40 to 225 °F [5]
PPST-9300
Copolymer [6]
10.50 x 8.50 x 2.13 [6]34.7; 17.4; 11.8 [6]PPJZL-9 [6] [14]2.25 [6] [14]-32 to 212 °F [6]
FXSTB-9400
MaxFlex [7]
10.50 x 8.50 x 2.13 [7]33.7; 9.3; 7.2; flatware 8.8 [7]FXLB-9 [11]2.25 [7]-40 to 225 °F [7]
PPST-9400
Copolymer [8]
10.50 x 8.50 x 2.13 [8]33.7; 9.3; 7.2; flatware 8.8 [8]PPJZL-9 [8] [14]2.25 [8] [14]0 to 212 °F [8]

These are material temperature ratings from individual sheets. Establish food-temperature checks and sanitation settings through your facility procedure.

FXLB and JZL lid dimensions

Translucent JZL-4200 flat lid for the JZCC-4200 segregation tray
JZL-4200, for the JZCC-4200 tray.
Translucent JZL-5200 flat lid for the JZCC-5200 segregation tray
JZL-5200, for the JZCC-5200 tray.
Translucent MaxFlex lid FXLB-4 for the small segregation tray
FXLB-4, MaxFlex, the small segregation tray lid.
Translucent MaxFlex lid FXLB-5 for the medium segregation tray
FXLB-5, MaxFlex, the medium segregation tray lid.
MaxFlex FXLB-9 translucent lid for the FXSTB-9300 tray
FXLB-9, MaxFlex, the large segregation tray lid.

Measure the lid overhang during a sample trial. Keep lid stock identified by model so staff can pick the documented assembly at the serving line.

Lid dimensions, case counts and material ranges
LidMaterialL x W x H (in.)Pieces / casePrinted range
FXLB-4 [9]MaxFlex [9]8.75 x 6.63 x 0.38 [9]24 [9]-40 to 225 °F [9]
FXLB-5 [10]MaxFlex [10]9.25 x 6.75 x 0.38 [10]24 [10]-40 to 225 °F [10]
FXLB-9 [11]MaxFlex [11]10.75 x 8.88 x 0.38 [11]24 [11]-40 to 225 °F [11]
JZL-4200 [12]Copolymer [12]8.75 x 6.63 x 0.38 [12]24 [12]0 to 212 °F [12]
JZL-5200 [13]Copolymer [13]9.25 x 6.75 x 0.38 [13]24 [13]0 to 212 °F [13]
PPJZL-9 [14]Copolymer [14]10.75 x 8.75 x 0.38 [14]24 [14]0 to 212 °F [14]

Source conflicts resolved by document date

The April 29, 2026 FXSTB-5300 sheet names FXLB-5 and prints a 2.38 inch height with lid. It is newer than the November 10, 2025 FXLB-5 sheet, which prints FX-5300. The newer tray sheet controls; the older lid reference remains documented here. [3] [10]

The FXLB-9 lid sheet lists FXSTB-9400, and its 10.75 x 8.88 inch size fits the 10.50 x 8.50 inch tray. The FXSTB-9400 tray sheet names FXLB-4, which is an 8.75 x 6.63 inch lid listed for FX-5300, so confirm the lid with JonesZylon when you order. [7] [9] [11]

The JZCC-4200 tray sheet, modified November 10, 2025, prints a 2.25 inch height with lid. It is newer than the October 17, 2025 JZL-4200 lid sheet, which prints 2.06 inches with tray. The newer tray sheet controls; the older height remains documented here. [2] [12]

The November 10, 2025 FXLB-4 sheet is newer than the FXSTB-4300 sheet by less than one minute and names FX-5300 rather than FXSTB-4300. This page therefore publishes no current lid pairing for FXSTB-4300 and retains the older FXSTB-4300 reference to FXLB-4 as the superseded conflict. [1] [9]

JonesZylon dinnerware carries a 12-month warranty from the date of purchase against defects in material or workmanship. Dinnerware determined to be defective due to improper material or workmanship, at the sole discretion of JonesZylon, will be replaced at no charge. See the full warranty terms.

Will SHU trays fit our door slot?

The FXSTB-4300, FXSTB-5300 and FXSTB-9400 sheets print “Double park trays in standard door slot (no need to wait for inmate to remove first one)”. Evaluate that arrangement against your opening and custody procedure. [1] [3] [7]

Have custody and food service staff measure the opening, loaded assembly and cart before requesting samples.

  • Clear opening width and height with the door hardware in its normal serving position.
  • Usable shelf depth, hinges, stops and any projections into the opening.
  • Loaded tray length and width, including the seated lid and overhang.
  • Actual assembled height and staff hand clearance during placement and retrieval.
  • Available support and clearance for the proposed double-park arrangement.
  • Cart shelf spacing, loaded stack height and clearance along the delivery route.

Run the placement and retrieval trial under facility supervision. Record the door location, tray and lid codes, meal load and result. Include each different opening design in the trial. Send those measurements with a quote request.

In-cell feeding workflow and meal counts

  1. Record meals by housing unit, diet and approved service items.
  2. Build the meal. Check portions in each compartment, seat the matched lid and count trays, lids and utensils separately. Record any missing or damaged pieces.
  3. Load the route. Test the exact assembly in the cart. Record usable positions and trays per meal. Calculate meals per trip from that tested arrangement, then round required trips upward. Include diet segregation and reserve meals in your plan.
  4. Deliver and account. Use the approved door-slot procedure. Record delivery timing and food-temperature checks required by your operating plan, including the last meal served.
  5. Collect and reconcile. Count returned trays, lids and utensils. Follow custody procedure for missing items; separate damaged pieces for review before the next service.

An EXPLORATORY planning example uses 48 meals, one tray per meal and 24 tested cart positions, which require two delivery trips. Using two trays per meal with those same positions requires four trips. Record your tested capacity when evaluating meal delivery systems and Mission Ready carts.

MaxFlex for high security and suicide watch populations

The JonesZylon catalog describes MaxFlex dinnerware as “Perfect for high security and suicide watch populations.” This is catalog positioning. [15]

[1] [3] [5] [7]

Hands bending a chocolate MaxFlex small segregation tray FXSTB-4300
FXSTB-4300 bent by hand.
Hands bending a chocolate MaxFlex medium segregation tray FXSTB-5300
FXSTB-5300 bent by hand.
Hands bending a chocolate MaxFlex four compartment tray FXSTB-9400
FXSTB-9400 bent by hand.
Hands bending a translucent MaxFlex segregation tray lid FXLB-4
FXLB-4 lid bent by hand.
Hands bending a translucent MaxFlex segregation tray lid FXLB-5
FXLB-5 lid bent by hand.
Hands bending a translucent MaxFlex segregation tray lid FXLB-9
FXLB-9 lid bent by hand.

Have custody and clinical staff evaluate samples against the facility's population-specific policies. Document the approved tray, lid and utensil combination, issue counts and inspection criteria. Review the broader MaxFlex dinnerware line and MaxFlex utensils with the same team.

Cleaning, drying and the next meal service

The FXSTB-9300 sheet lists dishwasher suitability.

At return, reconcile the count, remove food residue and separate trays from lids. Position each piece for cleaning, complete the approved sanitation cycle, inspect for residue and damage, and allow pieces to dry before clean storage. Record rejected pieces and the usable stock available for the next meal. Check your actual tray and lid mix against drying rack arrangements.

Frequently asked questions

How do I choose between 4300, 5300, 9300 and 9400 trays?

Start with the menu portions, measured opening and loaded assembly. Use the tables to compare each complete SKU, then trial the tray and documented lid with staff.

Which lid fits the FXSTB-9400 tray?

FXLB-9. Its lid sheet lists FXSTB-9400, and its 10.75 x 8.88 inch size fits the 10.50 x 8.50 inch tray. Confirm the lid with JonesZylon when you order.

What assembled height should I use for JZCC-4200?

Use 2.25 inches from the newer JZCC-4200 tray sheet. The older JZL-4200 lid sheet prints 2.06 inches and remains cited as the superseded conflict. [2] [12]

Can we check samples before placing a tray order?

Use Request Free Samples and identify the tray and lid models you want to evaluate. Include your meal portions, opening measurements, cart configuration and facility review requirements.

Does the flatware slot count as another food compartment?

The 9400 sheets identify the final slot as a flatware slot. Plan the meal around that printed layout and the facility's utensil control procedure. [8] [7]

How should we specify trays and lids in a quote request?

List each model separately, the required piece count, matched lid, approved sample result and delivery location. Ask JonesZylon to confirm current colors, case quantities and availability for the order.

Specify the tray and lid for your SHU route

Include your model codes, menu portions, opening measurements and required quantities.

Request a Quote Request Free Samples

800-848-8160  |  solutions@joneszylon.com  |  305 Center Street, West Lafayette, OH 43845

Sources

  1. FXSTB-4300 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/FXSTB-4300.pdf (accessed 2026-09-07)
  2. JZCC-4200 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/JZCC-4200.pdf (accessed 2026-09-07)
  3. FXSTB-5300 specification (PDF). /pdf/Dinnerware/Compartment%20Trays/FXSTB-5300.pdf (accessed 2026-09-07)
  4. JZCC-5200 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/JZCC-5200.pdf (accessed 2026-09-07)
  5. FXSTB-9300 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/FXSTB-9300.pdf (accessed 2026-09-07)
  6. PPST-9300 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/PPST-9300.pdf (accessed 2026-09-07)
  7. FXSTB-9400 specification (PDF). /pdf/Dinnerware/Compartment%20Trays/FXSTB-9400.pdf (accessed 2026-09-07)
  8. PPST-9400 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/PPST-9400.pdf (accessed 2026-09-07)
  9. FXLB-4 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/FXLB-4.pdf (accessed 2026-09-07)
  10. FXLB-5 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/FXLB-5.pdf (accessed 2026-09-07)
  11. FXLB-9 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/FXLB-9.pdf (accessed 2026-09-07)
  12. JZL-4200 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/JZL-4200.pdf (accessed 2026-09-07)
  13. JZL-5200 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/JZL-5200.pdf (accessed 2026-09-07)
  14. PPJZL-9 specification (PDF). /pdf/Dinnerware/Segregation%20Trays/PPJZL-9.pdf (accessed 2026-09-07)
  15. JonesZylon Product Catalog, p. 4 (PDF). /pdf/Catalog/JonesZylon%20Product%20Catalog.pdf (accessed 2026-09-07)
Contact Us