Retherm Ovens

Experience simplicity in volume meal preparation with JonesZylon's rethermalization ovens designed specifically for correctional facilities. Our series of rethermalization ovens will help you address the unique challenges with safely preparing hot, ready-to-eat meals at scale without overcooking or drying out your meals. In many instances these products help you upgrade your batch cooking process without having to install large scale ventilation systems. These are designed to accommodate a variety of tray styles and pan sizes. Furthermore, we can pair them with just the right delivery system to increase efficiency and ensure temperature compliance throughout the entire meal preparation and delivery process

Carts Contact Us
JonesZylon retherm oven shown with its door open and closed

Quick answer

Choose a correctional retherm oven by the tray or pan, batch load, available power, controls and the facility’s approved retherm process. Current model specifications are pending, so request the matching sheet and manual before setting capacity or utilities.

Request a Quote Schedule a Virtual Demo

Retherm controls and installation review

Retherm oven control panel above the tray shelves

Review the oven controls, tray loading arrangement, installation requirements and operating instructions for the exact model. Confirm how staff select programs and who controls access to settings. Request current documentation before specifying a reheating cycle, electrical service or ventilation arrangement.

Retherm oven model size and electrical specification diagram

Retherm Ovens

For this existing model, use the retherm documentation checklist when requesting current specifications.

JonesZylon retherm oven with open doors and tray shelves
Electrical & Build

Request the model-specific electrical schedule and installation manual.

Capacity:

Request the loaded tray or pan drawing.

Features to confirm

Request current controls, security hardware, construction, caster and warranty specifications for this model.

For this existing model, use the retherm documentation checklist when requesting current specifications.

JonesZylon retherm oven with closed doors
Electrical & Build

Request the model-specific electrical schedule and installation manual.

Capacity:

Request the loaded tray or pan drawing.

Features to confirm

Request current controls, security hardware, construction, caster and warranty specifications for this model.

For this existing model, use the retherm documentation checklist when requesting current specifications.

JonesZylon retherm oven with separate upper and lower tray compartments
Electrical & Build

Request the model-specific electrical schedule and installation manual.

Capacity:

Request the loaded tray or pan drawing.

Features to confirm

Request current controls, security hardware, construction, caster and warranty specifications for this model.

Retherm Planning & Pricing

Request a Quote for Correctional Retherm Ovens

Get pricing on a retherm oven matched to your meal count, tray system, electrical service, and security requirements.

Share your meals per cycle, tray or pan type, available power, and delivery process.

  • Meal volume. Request a documented capacity for the proposed tray or pan load.
  • Power requirements. Confirm voltage, phase, plug, and installation needs.
  • Trays and workflow. Account for tray size, production method, and service timing.
  • Security. Confirm control access, hardware details and construction for the proposed model.
Not sure which model fits? Send your meal count, tray style, power, and delivery route. We’ll help size the oven and carts.
Step 1 of 2
What type of facility are you purchasing for?
Your facility type helps us route the request and recommend the right retherm system.
Step 2 of 2
Tell us about your retherm operation.
Share what you know. We’ll help determine capacity, power, shelving, security options, and delivery equipment.
Helpful details: meals per cycle, tray size, production method, voltage and phase, delivery time, installation timing, and cart needs.
Something went wrong. Please try again or email us at solutions@joneszylon.com.
Your quote request is in.
Thank you. A JonesZylon correctional food service specialist will review your retherm requirements and follow up about model selection, capacity, electrical needs, pricing, and any complementary meal-delivery equipment.

How does cook-chill retherm fit a correctional kitchen?

Rethermalization is the reheating step for previously prepared food. A cook-chill workflow also needs a defined preparation and chilling process, chilled storage, batch identification and a plan for service after reheating. Identify the responsible person and the food checks at each handoff.

Give JonesZylon the intended menu, portion size, container and food condition entering the oven. Request a documented process, oven cycle, food-temperature target and validated load for that combination.

JZCC-5400 cook and chill tray with one large and two small compartments
JZCC-5400 cook and chill rethermalization tray.
JZL-5400 lid that seats over the JZCC-5400 cook and chill tray
JZL-5400 lid for the JZCC-5400 tray.

The JZCC-5400 cook and chill tray is polyphenylsulfone with three compartments, one 24.5 ounce well and two 7.4 ounce wells, listed at up to 400 F. Its lid is the JZL-5400.

Connect cook-chill batches to housing-unit delivery

  1. Identify the batch and destination before chilled storage, following the facility's approved preparation and chilling procedure.
  2. Have authorized staff select the documented process and record the required checks.
  3. Follow the facility procedure for release after reheating. Record incomplete or delayed loads separately.
  4. Transfer meals to the confirmed holding or transport equipment. Coordinate dispatch with the receiving unit and custody staff.
  5. Reconcile meals at handoff and return trays, racks and accessories through the assigned collection and cleaning path.

Batch count and late-tray planning

Set batch size from the documented oven load and the approved process once current model records are available. Give late trays a separate documented heating, identification and release path.

Electrical service, ventilation and restricted control access

Send facilities staff the current installation instructions and nameplate requirements before selecting a circuit or preparing the room. Confirm voltage, phase, connected load, protective devices and the connection method for the exact oven. Request the required clearances and ventilation assessment for the proposed installation.

Ask the operator to demonstrate program selection, changes to settings and access control. Identify who can change a process and who records those changes. Confirm access controls and installation requirements for the selected model.

Cleaning and documentation before a retherm purchase

Request the approved cleaning procedure for the oven cavity, shelves, controls and removable parts. Confirm disconnection, cooling, chemical compatibility and drying instructions. Assign a return location and counting process for racks, trays and accessories before they are released for another meal period.

Current model-specific sheets and manuals are needed for JZRT-240-144, JZRT-480-192 and JZRTN-480-162. Ask JonesZylon to confirm specifications, availability, sourcing, parts support and warranty with the quote. Keep the purchase request pending until JonesZylon supplies those records.

What documentation should accompany a retherm quote?

Request a separate current sheet for JZRT-240-144, JZRT-480-192 or JZRTN-480-162, matching the quoted model. Include the operating manual, loaded tray or pan arrangement, electrical schedule and applicable warranty. Have the reviewer check that each document applies to the quoted oven.

Frequently asked questions

Can I use a holding cabinet as a retherm oven?

The cited holding-cabinet sheets do not establish a reheating process. Use documentation for equipment intended for the approved retherm task.

Are current retherm specifications available on this page?

No. Request current model sheets and manuals before specifying capacity, electrical service, tray compatibility or cycle settings.

Does this page approve SmartTray for oven use?

No. Compatibility must cover the exact tray, lid, oven and process; a material temperature range alone does not establish it.

Request a Quote Schedule a Virtual Demo

Sources

  1. JZH-12UBT (PDF)
  2. JZR-6UBT (PDF)
  3. JZCC-5400 (PDF)
Request a Quote